Description
Dropout Fuse Cutout is a kind of outdoor high voltage protection device.It is connected with the incoming feeder of the distribution transformer or distribution lines and primarily used to protect transformers or line against the impact raised by the short circuit, overload switching current.Dropout Fuse Cutout is composed of insulator support and a fuse carrier,static contacts that are fixed on two sides of insulator support and moving contact installed on two ends of fuse carrier.The interior of the fuse carrier is the extinguishing tube while the exterior is made of phenolic compound paper tube or expoxy glass.
During the normal operation, the fuse link is tightened to form the closing position.In fault current situation,the fuse link melts and an electrical arc is formed.The arc-extinguishing tube is heated and explosion of gas occurred which cause high pressure inside the fuse carrier tube and makes the tube separate from contacts.The contact is relaxed once the fuse element melts.
The Fuse Cutout is now in the open position,the operator needs to switch the current off.The moving contact can be pulled off by an insulated hot sticker.The main contact and auxilary contact are connected.
10-12kv 100A 200A Porcelain Expulsion Drop out Fuse Cut out Fuse
33kv-36kv 100A 200A 300A Polymer Expulsion Drop out Fuse Cut out Fuse
33kv-36kv 100A 200A Porcelain Expulsion Drop out Fuse Cut out Fuse
24-27kv 100A 200A Polymer Expulsion Drop out Fuse Cut out Fuse
24-27kv 100A 200A Porcelain Expulsion Drop out Fuse Cut out Fuse
12-15kv 100A 200A Polymer Load Expulsion Drop out Fuse Cut out Fuse
Reviews
There are no reviews yet.